We primarily produce fully automatic molding machines utilizing the green sand process.

1.Cast Iron (Gray iron, ductile iron) 2.Non-ferrous Metals (Copper alloys e.g., bronze, brass – requires controlled pouring temperature) 3.Partial Light Alloys (e.g., small-batch simple parts of Al/Mg alloys, but with limited surface finish).

Matching Casting Complexity with Equipment​​ Small/Medium Simple Castings​​ (e.g., standard parts, hardware): ​​Recommended​​: Side-shooting molding machines. Suitable for parts with simple geometries and no deep cavities​Limitation​​: Single-direction sand shooting may cause "shooting shadows" (inadequate filling behind patterns), leading to uneven compaction Complex Castings​​ (e.g., engine blocks, multi-cavity valves): Recommended​​: Top-bottom sand shooting machines. Advantages​​: Dual shooting (top + bottom) eliminates shadows, ensures full filling for deep cavities and intricate structures Uniform compaction reduces defects like porosity by >30%

Yes, we can provide solutions and integrated production lines according to the actual needs of our customers.

Our machines come with a one-year quality guarantee, and our after-sales service is available to keep you online for a long time. You can contact us via mobile phone/WeChat/WhatsApp, etc.

Our technical staff can visit your location to assist with installation, maintenance, and training.

Pay a 30% deposit to start production. Shipment will be made after the remaining 70% balance is paid. During this period, you can check the production quality through photos.